background image

Chapter 1 Preparation

The limitation

*1

 of connection between the projector and hub or computer 

Suitable LAN cables are limited by length and type as follows;

Connection

Type of usable LAN cable

Maximum length

Projector - Hub

UTP Straight Cable with category 3 or 5 *

2

100m

Projector - Computer

UTP Cross Cable with category 3 or 5*

2

100m

*1   There may be other limitations depending on your network environment or LAN specification. 

Please consult your network administrator for further details.

*2  Category of LAN cable indicates the cable quality. Normally, a cable with category 3 or 5 is used 

for 10Base-T network, and a cable with category 5 is used for 100Base-TX network.

Notice

Expression/Abbreviation

The OS of the computer and the Web browser described in this manual is Windows XP 
Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruc-
tion procedures may differ from the actual operation depending on your computer envi-
ronment.

Use of this manual

This manual does not provide the description of basic operation and functions for com-
puter, web browser, projector and network. For instructions about each piece of equip-
ment or application software, please refer to the respective booklet.

Trademarks

Ethernet is a registered trademark of Xerox Corporation. Microsoft, Windows, Windows 
NT, Windows XP and Windows Vista are registered trademarks of Microsoft Corporation. 
Internet Explorer is a registered trademark of Microsoft Corporation. Netscape Navigator 
and Netscape Communicator are trademarks or registered trademarks of Netscape 
Communications Corporation. JavaScript is a registered trademark of Sun Microsystems, 
Inc. 
Macintosh is a registered trademark of Apple, Inc. in the USA and other countries. PowerPC 
is a registered trademark of IBM Corporation. Intel Core is a registered trademark of Intel 
Corporation in the USA and other countries.
Other product or brand names in this manual are registered trademarks or trademarks of 
their respective owners.

* Unauthorized use of a part or whole of the contents in this manual is prohibited.

* The contents of this manual are subject to change without notice.

Summary of Contents for Projector





























































Reviews: