Eiki LC-XSP2600, Service Manual

Page: 57 / 72

- 57 -
Service mode & Calibration
§ Service mode:
B. Set Up 01
B-1: C&B Calibration : Contrast and Brightness calibration adjustment.
B-2: Lamp Timer reset : To reset lamp timer when replace new lamp.
B-3: PIN Reset : PIN code reset
B-4: PIN Reset : Logo image is erased on the flash ram.
B-5: Filter Timer Testing: For EDI Internal testing purpose only.
P.S. If you execute the “ Filter Timer Testing ” function, the filter timer will
show ” 1000 ” operation hours and the alarm system will remind you
to replace filter.
B-6: Lamp Timer Testing: For EDI Internal testing purpose only.
P.S. If you execute the “ lamp Timer Testing ” function, the lamp timer will
show ” 1999 ” operation hours and the alarm system will remind you
to replace lamp.
B-1
B-5
B-2
B-6
B-3
B-4