30
MENU
Security Menu
Step:
1. Use the ▲ /▼buttons to
select an item.
2. Use the ◄ / ► buttons
to select an item or
adjust the value.
Item
Selection
Description
PIN LOCK
PROTECTION
OFF
ON 1
ON 2
OFF: Turn off PIN lock protection.
ON 1: PIN code is needed only at the first time after AC
power has been switched on.
ON 2: PIN code is needed every time while the projector is
turned on.
CAUTION:
Once the PIN code had been set, the projector cannot be
used unless you enter the correct PIN code.
MODIFY PIN
EXECUTE
1. Press “ MENU ” on the projector or remote control.
2. Use the ► button to select the MODIFY PIN item in the
SECURITY category.
3. Press the ► button to change PIN LOCK PROTECTION
mode.
4. Please enter the original PIN code.
(a) If the PIN is correct, system will allow you to change
a new PIN code.
(b) If the PIN is incorrect, a “ Code Error ” message will appear.
5. Please enter a new PIN code. And then enter again to confirm.
NOTE:
(1) To change the PIN lock protection state, you must
enter the PIN code first.
(2) Please enter: 0000 for first-time use.
(3) To avoid unnecessary trouble, if you activate the [PIN
Lock Protection], it is highly recommended that you
write down the PIN code and store it in a safe place.
