61
Follow these steps to replace the lamp.
Turn off the projector and disconnect the AC power
cord. Allow the projector to cool for at least 45
minutes.
Loosen 3 screws of the lamp with a screwdriver and
pull out the lamp upwards vertically by grasping the
handles.
Replace the lamp with a new one and tighten the 3
screws back into position. Make sure that the lamp is
set properly. Replace the lamp cover and tighten the
screw.
Loosen the screw with a screwdriver, slide and open
the lamp cover.
Connect the AC power cord to the projector and turn
on the projector.
Reset the lamp replacement counter .
See "Resetting the Lamp Counter" on the next page .
1
2
3
4
5
6
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give
the following information to the dealer.
●
Model No. of your projector
: LC-XD25U
●
Replacement Lamp Type No.
: POA-LMP129
(Service Parts No. 610 341 7493)
Screw
Lamp Cover
Maintenance and Cleaning
Lamp
Screw
Handles
Screw
Screw
