30
Choose
Computer 1
by pressing the INPUT button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Computer Input
Note:
When the Input Search function is set to
On1
or
On2
in
the Auto setup function, the input signal will be searched
automatically (p.48).
Computer
1
Top Control
INPUT button
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select
Input
and
then press the Point
►
or the SELECT button.
Use the Point
▲▼
buttons to select
Computer 1
and
then press the Point
►
button to access the submenu
items.
When
Computer 1
is selected, use the Point
▲▼
buttons to select
RGB
and then press the SELECT
button.
COMPUTER button
Remote Control
Computer 1
Computer 2
Computer 1
HDMI
Computer 2
S-video
Network
Video
COMPUTER 2
can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.