Eiki LC-SX3 Owner'S Instruction Manual Download Page 6

6

FEATURES AND DESIGN

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of
use.  The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.

Compatibility

This projector widely accepts various video and
computer input signals including;

Computers
IBM-compatible and Macintosh computers up to
1600 x 1200 resolution.

6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-
N color system can be connected.

S-Video
S-Video signals, such as a S-VHS VCR output
signals, can be connected.

High Resolution Image

This projector provides 1280 x 1024 dots resolution for
computer input and 800 horizontal TV lines.  The
resolution from the computer between 1280 x 1024 and
1600 x 1200 is compressed into 1280 x 1024 dots.  This
projector cannot display image of over 1600 x 1200 dots.
When the resolution of your computer is over than 1600
x 1200, reset the computer output for lower resolution.

Multi-Scan System 

This projector has Multi-Scan System to conform to
almost all computer output signals quickly.  There is no
need for troublesome manual adjustment of frequency
and other settings.

Multilanguage Menu Display

Operation menu is displayed in; English, Deutsch,
Français, Italiano, Español, or Japanese.

One-Touch Auto Imaging

Incoming computer video signals are recognized and the
best setting is automatically selected by the Auto Image
adjustment.  No complicated setup is necessary and
projection is always precise.

Digital Zoom (Computer Mode only)

The Digital Zoom magnifies the image up to 16 times,
allowing you to focus on crucial information at a
presentation.

Power Management

Power Management function is provided to reduce power
consumption while the projector is not in use.  
This Power Management function operates to turn the
Projection Lamp off when the projector detects signal
interruption and any button is not pressed over 5
minutes.  The Projection Lamp is automatically turned on
again when the projector detects the signal or any
operation button is pressed.
This projector is shipped with this function ON.

Wireless Mouse

The Wireless Remote Control Unit supplied with this
projector has Wireless Mouse function for the connected
computer.  This function enables you to operate both
projector and computer with this Wireless Remote
Control Unit only.

Motor-driven Lens Shift

The projection lens can be moved up and down with the
motor-driven lens shift function.  This function makes it
easy to provide the projected image where you want.  
The zoom and focus can be also adjusted with motor-
driven operation.

Laser Pointer Function

The Wireless Remote Control Unit supplied with this
projector includes the Laser Pointer function.  This
function helps you to make a smart presentation on a
projected screen.

The projector comes with the parts listed below.
Check to find all the parts are included. If any parts
are missing, contact an authorized dealer or service
station.

Owner's Manual.

AC Power Cord.

Wireless Remote Control Unit.

Wireless/Wired Remote Control Unit.

Remote Control Cable.

Batteries for Remote Control Units.

Graphic Accelerator Board and its Software.

Digital Flat Panel Cable.

VGA Cable.

Mouse Cable for PS/2 port.

Mouse Cable for serial port.

Mouse Cable for ADB port.

VGA/MAC Adapter.

Protective Dust Cover

Lens Cover.

Accessories

Summary of Contents for LC-SX3

























































Reviews: