—
43
—
DLP Projector — Owner’s Manual
Option Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
OPTION
and press
the
Enter
button to enter the
OPTION
menu. Press the arrow keys (
pq
) to select the menu option
and press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the
Enter
button
to confirm.
Auto Source
High Altitude
Test Pattern
Background Color
Hot-Key settings
Power Settings
Light Source Settings
Information
Factory Reset
Service
PICTURE
OUTPUT
SETUP
OPTION
OPTION
On
Off
Off
Logo
Blank Screen
I
tem
D
escrIptIon
Auto Source
Select “On” to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
High Altitude
Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Test Pattern
Choose the desired internal test pattern to display. Press the
Pattern
button
to display next test pattern.
Background Color
Use this feature to display a “Logo”, “Blue”, “Black” or “White” screen when
no signal is available.
Hot-Key settings
Assign a different function to the hot-key on the remote control by
highlighting the function in the list and pressing the
Enter
button. Choose
a function that does not already have a dedicated button, and assign the
hot-key to that function, allowing you to quickly and easily use the chosen
function.
Power Settings
Configure the power settings. See
“Power Settings Menu” on page 44.
Light Source Settings
Configure the light source settings. See
“Light Source Settings Menu” on
Information
Display the projector information for source, resolution, and software
version on the screen.
Factory Reset
Restore all settings to their default value. It will not reset network.
WARNING:
After resetting, lens calibration is necessary.
Service
For service only.
