—
44
—
DLP Projector — Owner’s Manual
Power Settings Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
OPTION
and press
the
Enter
button to enter the
OPTION
menu. Press the arrow keys (
pq
) to select
Power Settings
and
press the
Enter
button to enter the
Power Settings
menu. Press the arrow keys (
pq
) to select the menu
option and press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust
the desired settings and press the
Enter
button
to confirm.
Standby Power Mode
Direct Power On
Auto Standby
Auto Sleep
PICTURE
OUTPUT
SETUP
OPTION
Power Settings
Communication mode
Off
20 Mins
No
I
tem
D
escrIptIon
Standby Power Mode
Set the standby power mode.
•
0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
•
Communication mode: The projector could be controlled via the LAN
terminal during power standby.
Direct Power On
The projector automatically turns on when electrical power is connected.
Auto Standby
Automatically switch the projector to standby mode after no signals are
detected for a preset number of minutes. If an active signal is received, the
projector reactivates and displays the image.
Auto Sleep
Automatically switch to sleep mode after it has been on for a specified
amount of time.
