Eiki EK-355U, Owner'S Manual

Page: 16 / 87

16
Terminal
①
VIDEO IN
Connect video output signal to this terminal.
②
Micro-USB
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
③
VGA IN 1
Connect output signal from computer to this
terminal.
④
VGA OUT
Transmit signals from
③ or ⑤
to other displays
when the projector is acting as a output display.
⑤
VGA IN 2 / YPbPr / S-VIDEO
Connect output signal from computer, YPbPr or
S-Video to this terminal.
⑥
HDBaseT
Connect to this terminal through a network cable
to achieve the HDBaseT function.
⑦
HDMI 1
Connect HDMI digital output signals to this
terminal.
⑧
HDMI 2(MHL)
Connect HDMI digital output signals or MHL
digital output signals to this terminal.
⑨
USB
When using the Memory Viewer function, insert
the USB Flash Drivesy to this terminal directly.
⑩
LAN
Connect network cable to this port for controlling
and operating the projector via network.
⑪
AUDIO (L/R)
Connect audio signals to this terminal.
⑫
Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation
⑬
RS232C
Connect serial cable to this terminal when using
RS232 device to control or operate the projector.
⑭
Power cord connector
⑮
AUDIO IN
Connect audio signals
⑯
AUDIO OUT
Output audio signals to amplifier or other audio
equipment.
⑰
Speaker
Name and function of the projector
①
⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰
② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩