Indicator and projector state
Check the indicator to know about the state of projector
* When the lamp reaches the end of its life, the LAMP indicator lights Yellow. In this case,
replace the lamp with a new one promptly.
Green
Red
Yellow
Off
Flash green
Flash red
Flash Yellow
Indicator
State of projector
WARNING
(Red)
POWER
(Green/Red/
Yellow)
P
rojector is in Off status (without AC power supply).
P
rojector is in standby status. Press Standby button to turn it on.
P
rojector is in normal status.
It is ready for standby or the lamp is cooling. You may power on your projector
only after the lamp is fully cooled and the POWER light indicator stops flashing
P
rojector is in Ready mode.
P
rojector cannot power on, as its internal temperature is too high.
User
may
power it on after it is fully cooled, temperature backs to normal, and the
POWER light indicator turns red.
P
rojector detects lamp abnormality and switches into standby mode.
P
rojector detects the temperature abnormality and switches into standby mode.
P
rojector detects power abnormality.
P
rojector detects fan abnormality.
P
rojector detects its usage time ≥ the life of the projector -300H when the
projector usage time <1.1 times the life of the projector.
P
rojector detects its usage time ≥ 1.1times the life of the projector.
4
1
5
P
rojector cannot
light
on,
Please check the unit's lamp cover whether close well,
or the cover switch unnormal. If lamp cover, and cover switch is ok, but the unit
still not light up, thus please check Lamp, Ballast & it's connection pulg well.
