Eiki EIP-D450, Owner'S Manual

Page: 39 / 66

37
“Network” menu
SEL./ADJ. ENTER END
Pict. SCR PRJ Network Help
Password Disable
DHCP Client Off
TCP/IP
MAC Address
Projector
X X : X X : X X : X X : X X : X X
X X - X X X X
“Help” menu
SEL ENTER END
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
It is difficult to hear audio
Reset all adjustments to default settings
SEL.
Pict. SCR PRJ Net. Help
Main menu
Network
Page 49
Password [Enable/Disable]
DHCP Client [On/Off]
TCP/IP
MAC Address
Projector
Page 49
Page 50
Page 50
Page 50
Page 50
Main menu
Network
Page 49
Password [Enable/Disable]
DHCP Client [On/Off]
TCP/IP
MAC Address
Projector
Page 49
Page 50
Page 50
Page 50
Page 50
The items you can set with the
“Help” menu
“Help” menu
n
Page 51
Vertical stripes or fl ickering image appear
Auto Sync/Clock/Phase
Data image is not centered
COMPUTER or DVI-Analog input
Auto Sync/H-Pos/V-Pos/Resolution
DVI-D input
Switch to Plug-and-Play data
* Switch to Plug-and-Play data in the following
cases.
DVI-D Computer input
Standard : Aspect ratio 4:3 or 5:4 signals
such as 1024x768
Enhanced1 : Wide-screen signals such as
1280x800 are prioritized.
Enhanced2 : Wide-screen signals such as
1366x768 are prioritized.
DVI-D Video input
Standard : Normal
Enhanced : Select this item when no
image is projected in
“Standard” mode.
Color is faded or poor
COMPUTER or DVI input
Signal type: Auto/RGB/Component
S-VIDEO or VIDEO input
Video System: Auto/PAL/SECAM/
NTSC3.58/NTSC4.43/
PAL-M/PAL-N/PAL-60
DVD-D input
Dynamic range: Auto/Standard/Enhanced
* The selectable items vary depending on the input
signal and the selected input mode.
It is diffi cult to hear audio
Balance/Treble/Bass
•
•
•
•