Eiki EIP-3000N, Owner'S Manual

Page: 53 / 68

49
Setting up the Projector Network Environment (“Network” menu)
If you do not want others to change the setting
for the “Network” menu, set a password.
Select “Password”, then press
h
ENTER or
Q
.
• The screen for entering the password
appears.
1
1 1
1 1
1
Setting a Password
Press
P
or
R
to set the first digit
in “New Password”, then press
Q
.
2
Enter the remaining 3 digits, then
press
h
ENTER.
• To return to the previous digit, press
O
.
3
Enter the same password in “Re-
confirm”, then press
h
ENTER.
• The status for “Password” changes to
“Enable”.
4
Note
• Once after the password is set, you must en-
ter the password to change the “Network”
menu settings.
Select “Password”, then press
h
ENTER or
Q
.
• The screen for entering the password
appears.
1
Enter the password in “Old Pass-
word” using
P
,
R
,
Q
and
O
, then
press
h
ENTER.
Enter the password in “New Pass-
word” using
P
,
R
,
Q
and
O
, then
press
h
ENTER.
Enter the same password again in
“Reconfirm” using
P
,
R
,
Q
and
O
,
then press
h
ENTER.
Note
• If you do not need the password protection
for the “Network” menu settings anymore,
press
h
ENTER without entering new pass-
word in steps 3 and 4.
• To cancel the password settings, press
l
RETURN.
If you forget the password
If you forget the password, perform the fol-
lowing procedure to delete it, then set a new
password.
On the projector, press
o
→
p
→
o
→
p
→
o
→
p
→
r
.
Note
• If
p
ENTER is held down for more than 5
seconds, the operation buttons on the pro-
jector will be locked. (See page
48 .)
• You cannot use the buttons on the remote
control to delete the password.
2
3
4
a
Setting a Password
a
Changing the Password
Pict.
Password
SCR PRJ Network
DHCP Client
SEL./ADJ. ENTER END
Projector
MAC Address
EIP-3000N
0 0 : 0 B : 2 C : 0 1 : 0 0 : 0 0
Help
Disable
On
TCP/IP
Menu operation
n
Page 40
Setting the Password
Old Password
New Password
Reconfirm
–
– – – –
– – –
– – – –
Network
EIP-3000N_EN_CD_k 06.5.10, 9:49 AM 49