Eiki 1 122 511 01, Service Manual

Page: 44 / 312

-44-
Disassembly requires a 2.0mm or 2.5mm hex wrench and a screwdriver.
Optical Parts Disassembly
1 Shutter assy removal
Remove 2 screws-A (M4x6) to remove the shutter assy upward.
a a
Shutter assy
1 shutter assy removal
2 Panel/Prism assy removal
2-1 Polarized glasses-out/pre-polarized glasses removal
2-2 Lcd panels removal
3 Polarized glass/optical filter assy removal
3-1 Polarized glass-in/optical filter mounting
4 optical filter (Lc-cs) removal
5 integrator-in assy removal
6 PBs/integrator-out assy removal
7 condenser lens assy removal
8 relay lens assy removal
9 optical unit top removal
9-1 optical parts locations in the optical unit
10 optical lamp unit top removal 10-1 optical parts locations in the optical lamp unit
10-2 Mirror assy removal
10-3 optical filters assy removal
Order of disassembly
Guides
Guides
Note on mounting the shutter assy
Mount the shutter assy on the panel/prisml assy
carefully to set the holes of the shutter assy onto
the guides of the panel/prism assy.
Shutter assy
Panel/prism assy