www.eikengineering.com
2.2
Track Rollers Lubrication
Lubricate the track rollers with waste oil especially after the machine has been exposed to
water or sludge and after the machine has not been used for a long period. The machine may
travel smoothly and can extend the track rollers and pontoon life if the lubrication is done
frequently.
NOTE: Before lubrication, please refer to your local environment rules & regulations. Waste oil
may pollutes the environment especially water and plants.
Figure 2.5
2.3
Greasing
Greasing is very important for the wear and tear components such as bearing, pin and bushing
or gear mechanism. The purpose of greasing is not only limited to reduce the friction between
two or more contact parts but also as an additional protection from corrosion. The next figures
show the most important components/parts on the EIK amphibious undercarriage/excavator
that must be regularly greased in order to slow down the wear rate, corrosion and hence
extend the components life.
NOTE: Before apply greasing; please refer to your local environment rules & regulations. Grease
may pollutes the environment especially water, plants and animals.
2.3.1 Axle Bearing
Spherical roller bearing is sealed inside the bearing housing at each axle on each
pontoon. These bearings must be greased for every 50 hours (refer to figure 2.6 on next
page).
NOTE: Some models of EIK amphibious undercarriage/excavator do not have axle bearing.
20
