6
Cleaning, Disinfection and Sterilization
Page
24
/
35
z
Waiting for cooling before touching.
Storage:
Storage of sterilized instruments in a dry, clean and dust
free environment at modest temperatures, refer to label
and instructions for use.
WARNING
z
Sterility cannot be guaranteed if packaging is open,
damaged or wet.
z
Check the packaging before using it (packaging
integrity, no humidity and validity period).
Reprocessing
validation
study
information:
The above-mentioned reprocessing process (cleaning,
disinfection,
sterilization)
has
been
successfully
validated. Refer to cleaning/disinfection validation
reports No. RDS2020D0073 001, RDS2020D0076 001
and RDS2020D0075 001;
sterilization validation reports No. RDS2020S0081 001,
RDS2020S0084 001 and RDS2020S0083 001.
NOTE
z
Before sterilization, please remove the tip.
z
Make sure that the handpiece is intact and not damaged before
sterilization or use, and do not apply any protective oil on the handpiece.
z
The two O-rings on the handpiece cord (and the handpiece insertion
point) will be subject to force and wear during insertion and removal.
Users can apply dental lubricant to the O-ring in daily use. If the O-ring is
damaged or severely worn, causing water leakage or loose connection,
please replace the O-ring.
z
The instructions provided above have been validated by the manufacturer
of the medical device as being capable of preparing a medical device for
use. It remains the responsibility of the processor to ensure that the
processing, as actually performed using equipment, materials and
personnel in the processing facility, achieves the desired result. This
requires verification and/or validation and routine monitoring of the
process. Likewise, any deviation by the processor from the instructions
provided should be properly evaluated for effectiveness and potential
adverse consequences.
Summary of Contents for UltraMint
Page 1: ...Model UltraMint ULTRASONIC SCALER USER MANUAL...
Page 2: ......
