Błąd! Użyj karty Narzędzia główne, aby zastosować
标题
1 do tekstu, który ma się tutaj pojawić.
Błąd! Użyj karty Narzędzia główne, aby zas
tosować
标题
1 do tekstu, który ma się tutaj pojawić.
Page 15 / 37
6.Setting
6.1
Memory Parameter Setting
Fast-Fill has 3 memory programs (T1,T2,T3),
press
to change during standby state, the
memory number will change accordingly.
During any memory, holding down press
in 2
seconds, the “Temperature” of this memory can be
changed.
Press
till target temperature, the temperature
can be set from 100
℃
to 200
℃
.
Press
to confirm and enter next interface.
The “Push Speed” of this memory can be
changed.
Press
till target speed, the speed can be set
Low, Mid, High.
Press
to confirm and enter next interface.
The “Change GP” can be chosen.
Confirm the Gutta-percha need to change or not,
press
to adjust.
If choose “No”, Press
to confirm and return to
standby interface.
If choose “Yes”, see chapter
7.3 Changing Gutta-
percha
for more information.
Summary of Contents for Fast-Fill
Page 1: ...0197 Fast Fill USER MANUAL ...
Page 2: ......
