3.2 Installation
Make sure the installation location meets the following requirements.
Please keep objects away at least 10 cm for the side, front and back panels. Do not put
something other than another Eicom 700 series component on top of the ATC-700.
Place the ATC-700 on a level and sturdy bench top in an indoor laboratory which
meets the following requirements.
1. The room temperature during the operation needs to be in the range of 15~30C.
2. No high humidity environments where condensation may form on the equipment..
3. Not exposed to direct sunlight.
4. Away from air conditioning or heating vents.
5. No vibration.
6. Clean environment with a minimum of dust.
7. Not near any other device that can generate strong electromagnetic fields.
8. Not exposed to any corrosive or flammable gas.
4
