Eico EicoE30, Instruction On Mounting And Use Manual, Page: 45 / 76

AVVERTENZE I
45
GB OPERATION GB OPERATION
Step Operation Instructions
1
Connecting the load to the receiver
and power on it.
1.It is necessary to clear the code first, if the
receiver w as coded before.
2.Batch operation can be performed within
the remote control range.
2
Select area . Select the area with the " Zone" key and the
corresponding indicator lights up .
3
Press and hold “ON” on the remote
control for 5 seconds, the indicator of
the remote control will flash quickly,
means it enters the pairing code
transmission status.
Will automatically exit code transmission
status after 60 seconds, or pressing any key
to exit.
4
See the load light flashes 3 times and
return to the initial st ate.
Pairing c oding is finished successfully .
Step Operation Instructions
1
Connecting the load to the receiver and
power on it.
1. The clearing operation should be
finished within 1 minute after the
receiver is powered on. If exceeds the
time, can be powered on again.
2. Batch operation c an be performed
within the remote control range.
2
Press and hold the remote control “Off”
for 5 seconds. The indicator of the
remote control flashes quickly, means it
enters the clearing code transmission
status. There is no need to select the
corresponding area when clearing code.
1. Will automatically exit code
transmission status after 60 seconds, or
pressing any key to exit.
2. If the original remote control is lost, the
new remote control can be used for
clearing operations.
3
See the load light fla shes 3 times and
return to the initial state.
Clearing coding is finished successfully.
Code Pairing operation . Be sure only the device to match is switched ON
Code clearing operation