Eico 2280, User Instructions, Page: 25 / 32

25 3PCLIOBIU840THSE1
Induction Hob
user instructions
EN
GENERAL INFORMATION
Carefully read this use and maintenance manual, where
important information about installation, use and mainte-
nance safety is provided. Keep this manual for future ref-
erence. Any installation operation (electric connections)
shall be performed by specialized personnel, in compli -
ance with all standards and regulations in force.
SAFETY WARNING
The use of flat-bottomed pots, with a diameter equal to
or slightly bigger than the heated area, is recommended.
(Fig.6). Do not use pots that have a rough base, in order
to prevent the hob thermal surface from being scratched.
This appliance is not intended for use by children or in-
firm people without supervision.
IMPORTANT
- Avoid the overflow of liquids by reducing the heat
supply when boiling or warming liquids.
- Do not leave any heating element switched on, if
there are no pots, or if the pots are empty.
- Once cooking is completed, turn the concerned
heating element off, by using the control shown be-
low.
- This appliance is not intended for use by people
(children included) with limited physical, sensorial or
mental abilities, or lacking of experience and knowl-
edge, unless they are supervised or well instructed
about the use of the appliance, by a person who is
responsible for their safety.
- Children should be supervised to assure that they
do not play with the appliance.
- If the hob surface is cracked, turn the appliance off
and disconnect it from the electric network , so as to
avoid the possibility of electric shock.
INSTALLATION INSTRUCTIONS
These installation instructions are intended for a special-
ized installer and are meant as guidelines for the hob
installation, adjustment and maintenance, in compliance
with any regulations and standards in force. If a built-
in oven or any other appliance generating heat is to
be mounted directly under the vitro-ceramic hob, IT IS
NECESSARY THAT SUCH AN APPLIANCE (the oven)
AND THE VITRO-CERAMIC HOB ARE PROPERLY IN-
SULATED . Failure to comply with this precaution might
result in the incorrect operation of the TOUCH CON -
TROL system.
• Positioning:
This household appliance has been designed for built
–in installation onto a worktop, as shown in the figure
(Fig.1 A/B). Use sealing material along the whole perim -
eter (Fig.2) (Cut dimensions- Fig.1 A/B). This operation
is necessary in order to prevent any liquid from enter-
ing inside the hob, being that the flatness of the top, the
glass and their coupling cannot be assured. Fix the ap-
pliance on the worktop by using the 4 supports, taking
the work top thickness into account (Fig.4 A/B). If, after
installation, the lower part of the appliance is accessible
from the lower part of the cabinet, it will be necessary to
mount a spacing panel at the distances given (Fig.3). If
the appliance is installed under an oven, this step will not
be necessary.
• Electric connections (Fig.5):
•
The installation of this appliance and the connection
to the electrical network should be entrusted only to
an electrician perfectly to the fact of the normative
regulations and which respects them scrupulously.
•
Protection against the parts under tension must be
ensured after the building-in.
•
The data of connection necessary are on the stickers
place on the hob casing near the connection box.
•
The connection to the main must be made using an
earthed plug or via an omnipolar circuit breaking device
with a contact opening of at least 3 mm.
• The electrical circuit must be separated from the network
by adapted devices, for example: circuit breakers, fuses
or contactors.
• If the appliance is not fitted with an accessible plug,
disconnecting means must be incorporated in the
fixed installation, in accordance with the installation
regulations.
• The inlet hose must be positioned so that it does not
touch any of the hot parts of the hob or even.
Caution!
This appliance has only to be connected to a network
230 V~ 50/60 Hz.
Connect always the earth wire.
Respect the connection diagram.
The connection box is located underneath at the
back of the hob casing. To open the cover use a
medium screwdriver. Place it in the slits and open
the cover.
Caution!
Be careful that the cables are correctly engaged and
tightenet.
We cannot be held responsible for any incident
resulting from incorrect connection or which could
arise from the use of an appliance which has not
been earthed or has been equipped with a faulty
earth connection.
USE AND MAINTENANCE
• Maintenance (Fig.8):
Remove any food residue and grease drops from the
cooking surface, by using the special scraper provided
on request.
Clean the heated area in the best way possible, using
suitable products and a paper towel, then rinse with wa-
ter and wipe away with a clean cloth.
Through the use of the special scraper (optional),
promptly remove any pieces of aluminum foil and plastic
material, which might have accidentally melted, or sugar
or food remains, and/or remains of sugary foods, from
the heated surface. In this way, any possible damage to
the surface is prevented.
The use of abrasive sponges or irritating chemical clean-
ers, such as sprays for ovens or cleaning agents is not