16
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
Warranty
According to the general supply conditions for business dealings, suppliers have
to provide to companies a warranty period of 12 months for redhibitory defects.
Otherwise, the legal warranty period of 24 months applies.
(to be documented by
invoice or delivery note). Damage due to natural wear, overstressing or improper
handling are excluded from this warranty. Damages due to material defects or
production faults shall be eliminated free of charge by either repair or
replacement. Complaints will be accepted only if the tool was returned in non-
dismantled condition to the manufacturer or an authorized Eibenstock service
centre.
Declaration of Conformity
We declare under our sole responsibility that the product described under
“Technical Data” is in conformity with the following standards or standardization
documents:
EN 60 745
according to the provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EG
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig Frank Markert
General Manager Head of Engineering
06.02.2019
Subject to change without notice.
