16
While working always lead the line cord and extension cord to the back
away from the machine.
Electric tools have to be inspected visually by a specialist in regular
intervals.
Do not touch rotating parts.
The tool may be used only in two-hand operation or with the drill rig.
Keep the handles dry, clean and free of oil and grease.
Persons under 16 years of age are not allowed to use the machine.
During use, the user must wear goggles, ear protectors and protective
gloves.
Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts
. Loose clothes,
jewellery or long hair can be caught in moving parts.
During use, hold the machine with both hands and maintain a safe
standing position. Always consider the reaction moment of the
tool.
Always work with concentration. Always work in a carefully
considered way and do not use the tool if you are lacking
consideration.
For further safety instructions, please refer to the enclosure. .
Before starting the machine check the correspondence between voltage
and frequency according to the data mentioned on the identification plate.
Voltage differences from + 6 % and – 10 % are allowed.
The stirrer is made in protection class II. Only use extension cables with a
sufficient cross-section. A cross-section which is too small could lead to an
excessive power loss and to an overheating of motor and cable.
Recommended minimum cross sections and maximum cable lengths
Mains voltage Cross section in sq. mm
1.5
2.5
110V
20 m
40 m
230V
50 m
80 m
Additional Handle
When using the machine handheld than only with its additional
handle.
For mounting, screw it in the thread on the gearbox housing and fix it
tightly.
Electrical Connection
Summary of Contents for EHB 32/4.2
Page 2: ...2...
Page 31: ...31 Notizen Notes Notlar...