D3432
www.eibach.com
Page 1
Kit Contents
Description
Part Number
Qty
Front Bar
AS41-55-019-01-FA
1
Anti-Roll
Hardware
Kit
AS41-55-019-01-FAHK
1
Information
Kit
EPAK
1
Instructions
AS41-55-019-01-FAINST
1
NOTES:
Read All Instructions Before Beginning Installation
Only qualified mechanics experienced in the installation and removal of suspension components should
perform this installation.
Use
of a hoist and screw jack is highly recommended and will substantially reduce installation time.
Never work on or under a vehicle unless it is properly supported.
Tire Rotation:
In order to increase the life of your tires, it is recommended to rotate your tires every 3,000 miles.
FACTORY FRONT BAR REMOVAL
1. Begin by raising the vehicle and supporting it with the
proper safety equipment, then, remove the front wheels.
Note: Never work on or under a vehicle that is not
supported by the proper safety equipment.
2. Remove the left and right side inner fender covers, and
the center splash shield as shown.
(See Photos 1, 2, 3
& 4)
Installation Instructions
Anti-Roll-Kit
# AS41-55-019-01-FA
2016+ Mazda, MX-5, ND
Eibach Springs, Inc.
264 Mariah Circle
Corona, California 92879-1751
USA
Tech Support 800-222-8811 Ext 114
Photo
1
Photo
3
Photo
4
Photo
2
