Mercedes-Benz Interface Module Installation
- Part 2
Notice:
1. Make sure the key is not in the igntion and the vehicle is NOT in ACC mode during installation.
2. Please make sure this interface matches your car model.
1. Using trim removing tools,
disconnect the main unit.
Original Quadlock
原
车
Interface Quadlock
大线
线
大
司
我
5. Connect the provided Quadlock
connector into the OEM port. Using
the female end, connect the OEM
Quadlock onto the provided
Quadlock to close off the loop.
2. Remove the scres as shown above.
3. Remove the Command System
from the center console to access the
LVDS and Quadlock connections.
LVDS of Interface cable
Plug out of its original position, and
plug into Interface.
6. Unplug the OEM LVDS cable from
the back of the head unit and connect
it into the interface module as shown
above.
4. Unplug the OEM Quadlock
from the back of the command
system.
8. Connect the AV harness into the
module. Using the labeled inputs,
connect rear camera input into REAR
CAM IN and front camera into FRONT
CAM VIDEO IN (Sold Separately)
7. Using the provided LVDS cable,
connect the module back into the
original LVDS port as shown above.
www.EmeraldIntegrations.com
Phone: (844) 333-3903
4