background image

FREQUENT NUISANCE ALARMS OCCUR:

(1) Close kitchen / bathroom door when in use.

(2) Ensure that the alarm is sited at least 6m away from

sources of fumes.

(3) Contamination from insects, paint or paint fumes may have

occured. (see “Clean your Alarm”).

(4) If the problem persists, resiting of the unit should be

considered. Alternatively, replace the unit with an Optical
unit, assuming that the problem is with an Ionisation type
alarm.

Ei Electronics.

Shannon, Co. Clare, Ireland.

e-mail. [email protected]

Ei Electronics.

9 Grundy St., Liverpool L5-9SG.

Phone: +44 (0)151 2981588. Fax: +44 (0)151 2073312.

e-mail: [email protected]

Construction Product Type: 

Smoke Alarm Devices

Certificate of Conformity: 

0086-CPD-537430

European Standard:

 EN14604:2005

0086

08

MODEL

TYPE

Ei100R3

Ionisation 12V Smoke Alarm

Ei105R3

Optical 12V Smoke Alarm

Ei105R4

Optical 8-16V Smoke Alarm

 

16

The crossed out wheelie bin symbol that is on your 
product indicates that this product should not be disposed 
of via the normal household waste stream. Proper 
disposal will prevent possible harm to the environment or 
to human health. When disposing of this product please 
separate it from other waste streams to ensure that it can 
be recycled in an environmentally sound manner. For 
more details on collection and proper disposal, please 
contact your local government office or the retailer where 
you purchased this product.

13425-R1-12V COMMON-UC  29/9/09  7:56 AM  Page 16

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for Ei100R3

















Reviews: