3.
Connecting to Apple II®
1).
turn off the power switch of the Apple
II®
2).
open the top cover of the Apple
II®
3).
insert the connector of interface cable into Apple
11®
1/0
card
c:::J
CJCJ
D
�!
o o
�e;�0D
4).
insert Apple
II 1/0
card into SLOT#6
SLOT#
0 c:=::::J
I c:::=::J
interface cable
Apple
II
;
II 1/0
slot
4 c:::=::J
!5 c::=:::J
s
'1 c::=:::J
5).
put the top cover back
6).
turn on the power switch of the Apple
II®
7).
test
To Super
5
Note: Apple
II
must be switched off while the connector of interface cable is inserted into the
Apple
II.® 1/0
slot
4.
Installing floppy disk
1 )
.
turn on the power switch of the Apple
11®
2).
open the driver's door (set floppy disk lever horizontally)
3).
put the diskette into the driver
4).
close the door (set floppy disk lever vertically)
5).
the diskette will be running while the driver's "in use" light is on. never remove the diskette until
the
I
ight is off.
Note: turn on the power switch of the Apple
11®
before inserting the diskette into the driver.
5.
Removing diskette
1).
open the driver's door after the light of the indicator lamp is off
2).
take out the diskette from the driver
