![Ei Electronics RF Tool User Manual Download Page 16](http://html1.mh-extra.com/html/ei-electronics/rf-tool/rf-tool_user-manual_2369008016.webp)
This feature allows you to locate any of the units listed on the summary table. When
the button is pressed and the device is within range, the selected device will then sound
its horn if the unit has one.
Add Unit
The Add unit feature will allow you to add a new unit to an installation. Please note
that house coding must be done before using the add unit feature in the RF Tool.
To do this, put one of the existing units in the installation into house code mode as
well as this new device.
Ensure the new device is flashing the correct number of times, then take the unit out
of house code mode.
You will also be required to select each unit in the system individually and use the
update feature to ensure that the installation is up to date.
Remove Unit
The Remove unit feature will remove the unit from the installation. Please note that
house coding must be done before using the remove unit feature in the RF Tool by factory
resetting all the units in this installation. You will also be required to select each unit in
the system individually and use the update feature to ensure that the installation is up to
date.
14