N.B. We recommend, for ease of installation and RF communication, that up
to 12 RF devices can be installed in any one RF coded system. Please contact
us for further advise if additional RF devices are required.
You can exit this mode by pressing the House Code button on one of the RF Alarms.
Keep the button pressed until the blue light comes on solid and then release.
The Alarm will now send a signal to all the other RF devices in the system to exit
House Code. Alternatively, the RF devices will automatically exit the House Code
mode after 30 minutes. Note: Some RadioLINK devices do not support the on
demand exit House Code feature. You may allow them to automatically exit House
Code after the time period or if you wish, you can do it manually. Consult the
individual RadioLINK device manual for further instructions.
To check the system, press the test button on any Alarm. After a few seconds all
Alarms should now sound. All Alarms in the system should be checked similarly.
6
House Code Button
Red / Blue / Green LED
Figure 2
