manualshive.com logo in svg

Ei Electronics Ei3100RF? Ei3500RF, Instruction Leaflet

Share
Download
Ei Electronics Ei3100RF? Ei3500RF Instruction Leaflet Download Page 13

13

unit. If the beeping persists and the beep does not coincide 

with a red light flash, return the unit for service (see section 

11 “Getting your Smoke Alarm Serviced”).
7.6  Dust & Insect Contamination
All Smoke Alarms are prone to dust and insect ingress which 

can cause false alarms.
The latest design, materials and manufacturing techniques 

have been used in the construction of our Alarms to 

minimise the effects of contamination. However it is 

impossible to completely eliminate the effect of dust and 

insect contamination, and therefore, to prolong the life of the 

Smoke Alarm you must ensure that it is kept clean so that 

excess dust does not build up. Any insects or cobwebs in 

the vicinity of the Smoke Alarm should be promptly removed.
In certain circumstances even with regular cleaning, 

contamination can build up in the smoke sensing chamber 

causing the alarm to sound. If this happens the alarm must 

be returned for servicing or replacement. Contamination is 

beyond our control, it is totally unpredictable and is considered 

normal wear and tear. For this reason, contamination is not 

covered by the guarantee and a charge is made for all such 

servicing work. (If dust or contamination is likely in an area, 

it is often better to fit an Ei3100RF / Ei3500RF Ionisation 

Smoke Alarm as they are less effected by contamination than 

the Ei3105RF Optical Smoke Alarms).
7.7 Replacing the Battery
A fresh Alkaline Battery should last for over a year. When the 

battery power is low and replacement is necessary, the Alarm 

will “beep” and the red light will flash at the same time about 

once per minute for at least 30 days. The battery must then be 

replaced. Also, replace the battery if the alarm does not sound 

when the Test Button is pressed. 
For maximum reliability, replace the battery at least once a 

year.  When you replace the battery you must press the test 

button to check that the alarm is functioning okay.

 

Do not put the battery into a fire.
Product Disposal

The  crossed  out  wheelie  bin  symbol  that  is  on  your 

product indicates that this product should not be disposed 

of  via  the  normal  household  waste  stream.  Proper 

disposal will prevent possible harm to the environment or 

to  human  health. When  disposing  of  this  product  please 

separate it from other waste streams to ensure that it can 

be  recycled  in  an  environmentally  sound  manner.  For 

more  details  on  collection  and  proper  disposal,  please 

contact your local government office or the retailer where 

you purchased this product.

Block E1

Summary of Contents for Ei3100RF? Ei3500RF





















Reviews:

No comments

Brands by name

Popular brands

Load more brands