7
We recommend a monthly check of your Alarm system.
When checking the system also check the Relay Base as follows:
1. Check that the green LED power indicator is lit on the Alarm
that is electrically connected to the Relay Base. If it is off, check
the circuit breaker fuse, wiring, etc.. when the mains power is
restored, the green LED will come on solid.
2. Press the Alarm Test Button and check that:
a. The relay switches and
b. The auxiliary device behaves as expected
End of Life
After 10 years (see date label on the side of the Relay Base) the
Relay Base must be replaced.
It is important to check that the rechargeable cells in the Ei128RBU
are switched on, charged and capable of switching the relay contacts.
This should be done after installation and then at least annualy.
1. Disconnect the mains supply.
2. Check the relay as described in section 6.
3. If everything is satisfactory, re-connect the mains.
If the relay fails to operate, then the unit is defective and must be
replaced (see section 8).
If, within the guarantee period, your Relay Base fails to work after
your have carefully read all the instructions, checked that the unit
has been installed correctly, and is receiving AC power, then
contact us at the nearest address given at the end of this manual.
If you are advised to return your Relay Base, please ensure that it
is placed in a padded box, that the slide switch for the rechargeable
cells is on the OFF position (Ei128RBU only) and include the proof
of purchase and a note stating the nature of the fault.
Ei Electronics, guarantees the Relay Bases for five years from date
of purchase against any defects that are due to faulty materials or
workmanship. If this Relay Base should become defective within
the guarantee period, we shall at our discretion repair or replace
the faulty unit.
This guarantee only applies to normal conditions of use and
service, and does not include damage resulting from accident,
neglect, misuse, unauthorised dismantling, or contamination
howsoever caused. This guarantee excludes incidental and
consequential damage.
This guarantee does not apply to any product that has been
modified in any way by a third party or has been fitted with a
third-party element.
Do not interfere with the Relay Base or attempt to tamper with it.
This will invalidate the guarantee, but more importantly may expose
the user to shock or fire hazards.
This guarantee is in addition to your statutory rights as a consumer.
7. Checking the Relay Back Up Cells (Ei128RBU)
8. Getting your Relay Base Serviced
9. Guarantee
6. Checking your Smoke Alarm System
