Ehrgeiz Fusion FS-60 RGB/1, Operating Manual, Page: 5 / 26

4
Overhead Rigging
This Item must be built in a way that it can hold 10 times more of
its weight for 1 hour without causing any damages.
The installation must be secured with a secondary safety
attachment. The safety attachment has to be constructed in a
way that no part of the installation can fall down
When rigging, de-rigging or servicing the fixture staying in the
area below the installation place, on bridges, under high working
places and other endangered areas is forbidden.
Before taking the device in operation, the installation must be
approved by an expert.
The operator has to make sure that safety-relating and machine-
technical installations are approved by a skilled person once a
year.
Procedure:
The Device must be installed outside areas where persons may
walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE
EXPERIENCE, including (but not limited to) calculating working
load limits, installation material being used, and periodic safety
inspection of all installation material and the projector. If you lack
these qualifications, do not attempt the installation yourself, but
instead use a professional structural rigger. Improper installation
can result in bodily injury and/or damage to property.
Use only professional trussing systems if the Item shall be
lowered from the ceiling or high joists. Never let the Device swing
freely in a room.
Caution: Overhead Items may cause serious injuries when
crashing down!! If there is concern about the safety then DO
NOT INSTALL the Device!!!!