12
2 Installation instructions
2 Installation instructions
Pre-drilling the hinge profile
WARNING
Danger of injury/property damage caused by
unsuitable fastening materials
Select fastening material in accordance with
the load capacity of the installation substrates!
NotE
the selection of the fastening method is de-
pendent on the substrate and is therefore ex-
clusively your own responsibility.
the connection profile must be aligned per-
pendicularly on-site
Unpack the delivery, check the state of the
items and that all items are included
Select the number of fastening holes as well
as connecting elements
Pre-drill the hinge profile
EHRET recommends fastenings with a dis-
tance of max. 70 mm to the top/bottom
frame edges and max. 150 mm between the
other fastenings.
max. 70
max. 150
max. 150
max. 150
Pre-drilling
Fastening sash packet 1 to the con-
nection profile
Place the support under the sash packet
Ensure that the screw heads do not touch
the upper edge of the reveal!
check the gap at the top and bottom
There must be a 10 mm gap between both
the upper or the lower sash edge and the
edge of the reveal
10
10
Checking the gap
Insert the sash packet with the pre-drilled
hinge into the connection profile
Support
connection profile
