13
2 Installation instructions
pre-drill the frame for bolting with counter-
sunk screws
EHRET recommends fastening the frame
100 mm away from each of the frame corners
and also at intervals of max. 600 mm on all
sides.
2.5
100
100
≤600
≤600
≤600
10
0
10
0
≤6
00
≤6
00
≤6
00
line up the mounting holes with the drilling
groove
If you are not using the drilling groove, please
only drill inside the drilling range shown!
Drilling range
clip profile
Drilling groove
Drilling range
Fasten the frame
NotES
to avoid a collision with the clip profile, use
countersunk screws for fastening purposes.
2.6
Fastening screw
