
eHome EH10 Quick Install Guide
Adapter Installation
Please install the EH102 PCI Adapter into your computer before
installing the driver software from the eHome CD.
Turn off your computer and unplug the power cord from the computer.
Open the case and insert the eHome adapter into an available PCI
slot. Once inserted, close the case and insert the power cable into the
computer. Attach the antenna and then turn on your computer.
Note:
Before installing, write down the serial number and hardware
revision (e.g. A1) in case you need to contact technical support.
When the
Found New Hardware Wizard appears, click
Cancel
. Insert
the eHome EH102 Driver CD into the CD-ROM drive. The instructions
that follow are shown in Windows
®
XP. The steps and screens are
similar for the other Windows
®
operating systems.
If the CD Autorun function does not automatically start on your
computer, go to
Start
>
Run
. In the run box type “D:\Drivers\setup.
exe” (where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click
Install Drivers
.
Summary of Contents for EH-102
Page 1: ......