10
9
Wrap the end of the Yale strap with the buckle once
around the back of the frame so that the buckle runs
through the bottom.
Front of the Nestbox assembly: if your car‘s anchor
points are below Nestbox, in the rear of the vehicle,
then use the following procedure.
Make sure that you have the assembly anchored
properly in the rear; see anchoring the rear of the
Nestbox. Then open the empty main drawer which
provides easy access to the bottom of the Nestbox
metal frame and anchor points E.
anchor point E
The other side of the strap goes over the rear frame
structure towards the front where it must be wrapped
3 times.
Then pass the strap under anchor point E and back
towards the buckle.
Pull the loose end of the strap through this buckle which
tightens the whole strap and lock it using the buckle.
Follow the same procedure on the opposite side.
anchor point E