56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC
66
LCD
Display Description
Fault code
on LCD
Mower
Status
Indicator
Audio
Indicator Cause
Solution
The over-heat icon and
the exact occupied battery
compartment blink at the
same time
n/a
n/a
No
The battery
pack in the
correspond-
ing num-
bered battery
compartment is
overheated.
1. The mower can continue working
if the combined battery Ah rating,
overheated battery excluded, is
equal to or more than 15Ah. Once
the overheated battery returns to
normal temperature, it will join in
powering the mower immediately.
2. If the combined battery Ah rating
is less than 15Ah, the mower will
not work until more battery packs
are inserted into the vacant battery
compartments.
3. Reduce the load of the mower by
raising the deck cutting height or
slowing down the mowing when
resuming operation.
The icons of each occupied
battery compartment,
low power indicator, fuel
gauge blink every 1 second
at the same time on the
LCD screen. The first LED
fuel-gauge & mower status
indicator blinks too.
n/a
Flashes red
Keeps
beeping
until the
PTO switch
is pushed
downward.
The battery
packs are low
on charge and
the mower is
in Limp Home
mode.
Stop working and return to the battery
charging area.
NOTICE:
When the mower is in Limp-
Home mode, the blades are automati-
cally switched into low rotation speed
without grass cutting and meanwhile
the audio indicator will keep beeping.
The operator should push the PTO
switch downward to disengage the
deck blades. The audio indicator will
stop beeping after blade stopping.
The icon of each occupied
battery compartment and
low power indicator blinks
every half a second, the
first LED fuel-gauge will
flash red every half a
second too.
n/a
OFF
No
The battery
packs are
nearly depleted.
The mower will stop working
immediately. The operator should
transport the mower to the battery
charging area for charging.
The auto-parking icon
blinks on the LCD
n/a
OFF
Keeps
beeping
The mower is
parked on a
slope and the
operator leaves
the mower
without setting
the parking-
brake pedal
at the braking
position, just
with the lap
bars in the open
position.
Set the brake pedal at the braking
position. The auto-parking icon will be
off and the sound indicator will stop
beeping.