56 VOLT LITHIUM-ION CORDLESS PORTABLE AREA LIGHT — LT1000E
6
OPERATING THE CONTROL INTERFACE (Fig. D)
NOTICE:
When the area light is turned on, it remembers
the last active panel selection and restores upon restart.
However, the brightness setting always resets to the default
lowest brightness level 1 (600lm).
Power button
Press the power button briefly to turn the light ON.
Press the power button briefly again to turn the light OFF.
Brightness adjustment
◾
Press the “+” button to increase the brightness and
press the “-” button to decrease the brightness.
◾
Press and hold the “+” button for 2-3 seconds to start
the “BOOST” mode, i.e. the maximum brightness.
◾
When in “BOOST” mode:
- Press the “-” button and the brightness will return to
the previous level.
- To prevent overheating, the light will automatically
shift down to the brightness level 5 (6,400lm) after
about an hour of operation in “BOOST” mode. If
this happens, allow the light to cool down and try to
activate the “BOOST” mode again.
Panel selection
◾
Press the “PANEL SELECT” button to toggle between:
- All four panels are on;
- Only the side panels and the upper panel are on;
- Only the upper panel is on.
◾
Press and hold the “PANEL SELECT” button for 2-3
seconds to start the “Emergency” mode, i.e. all FOUR
panels will be flashing.
◾
When in “Emergency” mode, pressing any button
(except the power button) restores the light to its
previous brightness setting and panel selection.
USB port
The USB port provides charging power of 5 Volts DC at up a
combined draw of 1.5 Amperes for your USB devices.
AUTOMATIC SHUTOFF (Fig. E)
This area light features an automatic shutoff switch that will
turn the light off if upper panel is folded within 10±5° from
the lower panel.
USING THE LIGHT (Fig. F1-F3)
WARNING:
Ensure the light is securely installed
to prevent falling object hazard. Failure to follow the
instruction can result in serious personal injury.
◾
To hang the light, pull out the hooks located in the base
of the unit and hang the light upside down.
◾
To mount the light to a tripod (not included), secure the
tripod screw to one of the tripod mounting holes on the
bottom of the base.
◾
For portable illumination, carry the light by top handle.
MAINTENANCE
WARNING:
When servicing, use only identical
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified
service technician.
WARNING:
To avoid serious personal injury,
always remove the battery pack from the product when
cleaning or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids,
petrol, petroleum-based products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in
serious personal injury.
TRANSPORTING THE UNIT (Fig. G)
1. Fold the panels and hooks into storage position.
2. Carry the light by the main handle. Main handle can
be pivoted within 215° range and fixed at a desired
angle by the lock-knob if necessary.
STORING THE UNIT
1. Fold the panels and hooks into storage position.
2. Store the light in a dry, well-ventilated area, out of
the reach of the children. Do not store the light on or
adjacent to fertilizers, gasoline, or other chemicals.
Protecting the environment
Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities.
Contact your local government for
information regarding the collection
systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.
