EGO LM2100E, Operator'S Manual

Page: 15 / 20

56 VOLT LITHIUM-ION CORDLESS MOWER — LM2100E/LM2100E-SP
15
EN
TROUBLESHOOTING
WARNING:
Always remove the safety key and battery pack when servicing or transporting the mower. Always
protect your hands by wearing heavy gloves or wrapping the cutting edges with rags or other materials when
performing any maintenance on the mower blade.
PROBLEM CAUSE SOLUTION
The mower fails
to start
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
The battery pack is not mounted in place in the
battery compartment.
◾
Attach the battery pack to the
mower; press it until you hear
a click.
◾
The battery or mower circuitry is too hot.
(The power indicator on the mower will illuminate
in orange for 10 seconds)
◾
Allow the battery pack or mower
to cool until the temperature drops
below 67°C.
◾
The side rails are not extended to their maximum
length and the clamps are not locked in position.
◾
Fully extend the handle and lock
both clamps.
◾
The handle is not set at one of the three operating
positions.
◾
Adjust the handle to one of the three
operating positions.
◾
The mower deck is clogged with grass and debris.
◾
Clean the mower deck and make
certain that the blade has freedom
of movement.
The mower cuts
unevenly
◾
The blade is dull.
◾
Sharpen or replace the blade.
◾
The cutting height is not set properly.
◾
Raise the deck to a higher cutting
height setting.
◾
The blade is assembled incorrectly.
◾
Reassemble the blade, following
the section “INSTALLING THE
BLADE” in this manual.
The mower stops
while mowing
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
Mower is in overload condition.
◾
Raise the cutting height or slow
down the mowing.
◾
Mower deck is clogged with grass and debris.
◾
Unclog the mower deck. Raise
the cutting height, or cut a narrow
swath.
◾
The battery or mower circuitry is too hot.
(The power indicator on the mower will illuminate
orange for 10 seconds.)
◾
Allow the battery pack or mower
to cool until the temperature drops
below 67°C.
◾
The side rail is retracted a little by the pushing
force applying on the handle.
◾
Unlock the clamps. Fully extend
the side rails and lock the clamps
again.