56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT6500E
7
◾
Check the blade and motor mounting bolts at frequent
intervals for proper tightness. Also, visually inspect
blade for damage (e.g., bent, cracked, and worn).
Replace the blade only with a blade from EGO
TM
.
◾
Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could damage
the motor drive unit or cause personal injury.
◾
If the equipment should start to vibrate abnormally,
stop the motor and check immediately for the cause.
Vibration is generally a warning of trouble.
◾
The trimmer shall be used to cut stems less than (33
mm) thick.
◾
Trim only in daylight or in good artificial light.
◾
Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge trimmer.
◾
Do not wash with a hose; avoid getting water in motor
and electrical connections.
◾
When servicing use only identical replacement parts
listed in this manual. Use of parts which do not meet
the original equipment specifications may lead to
improper performance and compromised safety.
◾
Follow instructions for lubricating and changing
accessories.
◾
Keep handles dry, clean and free from oil and grease.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
56 V
No-Load Speed
High
1600 /min
Low
1400 /min
Blade Length
65 cm
Cutting Capacity
33 mm
Weight
(without battery pack)
3.8 kg
Guaranteed sound power level
72 dB(A)
PACKING LIST
PART NAME
QUANTITY
Hedge Trimmer
1
Shield
1
Operator’s manual
1
DESCRIPTION
KNOW YOUR HEDGE TRIMMER (Fig. A)
1. Battery-release Button
2. Rear Handle
3. Lock-off Trigger
4. Rear Switch Lever
5. Speed Adjustment Knob
6. Front Handle
7. Front Switch Lever
8. Hand Guard
9. Blade Guard
10. Blade
11. Tip Protector
12. Latch
13. Electric Contacts
14. Mounting Slot
15. Ejection Mechanism
16. Lock for Handle
17. Motor Housing
18. Shield
WARNING:
This product has been shipped
completely assembled. The hand guard shall never
be removed during use. Once damaged, replace it
immediately by a qualified service technician.
WARNING:
The safe use of this product requires an
understanding of the information on the tool and in this
operator’s manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
OPERATION
WARNING:
Do not allow familiarity with this product
to make you careless. Remember that a careless fraction of
a second is sufficient to inflict serious injury.
