56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
16
◾
Never use the guide bar as a lever.
A bent guide bar can cause premature bar,
chain, and/or sprocket wear, as well as a broken chain or bar, leading to kickback,
chain throw or the ejection of material.
◾
Cut only one work piece at a time.
◾
Use only with the battery packs and chargers listed below:
BATTERY PACK
CHARGER
BA1400, BA1400-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,
BA5600T, BA5600T-FC
CH2100, CH2100-FC,
CH5500, CH5500-FC,
CH2800D, CH2800D-FC,
CH7000, CH7000-FC
◾
Do not charge the battery pack in rain or in wet locations.
◾
If situations occur which are not covered in this manual, use care and
good judgment. Contact EGO Customer Service for assistance.
SAVE THESE INSTRUCTIONS!
GLOSSARY OF TERMS
Automatic Oiler:
A system that automatically lubricates the guide bar and saw chain.
Bucking:
The process of cross-cutting a felled tree or log into lengths.
Bucking Spikes:
The pointed tooth or teeth for use when felling or bucking to pivot
the saw and maintain position while sawing.
Chain Brake:
A device used to stop the saw chain immediately.
Chain Saw Power Head:
A chain saw without the saw chain or guide bar.
Drive Sprocket:
The toothed part that drives the saw chain.
Felling:
The process of cutting down a tree.
Felling Back Cut:
The final cut in a tree felling operation made on the opposite side of
the tree from the notching undercut.
