56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E
8
SPECIFICATIONS
Voltage
56V
Maximum Air Volume at
Nozzle
1300 m
3
/h
Maximum Air Velocity
74 m/s (without
tapered nozzle)
87 m/s (with tapered
nozzle)
Maximum Blowing Force
26 N
Approximate Run Time (with
EGO BA2800T 56V Battery
5.0Ah)
150 min (Low speed)
25 min (High speed)
15 min (Boost mode)
Recommended Operating
Temperature
-15°C - 40°C
Recommended Storage
Temperature
-20°C - 70°C
Weight
2.1 kg
PACKING LIST
PART NAME
QUANTITY
Blower
1
Shoulder strap
1
Nozzle attachment
2
Blower tube
1
Operator’s manual
1
DESCRIPTION
KNOW YOUR BLOWER (Fig. A)
1. Speed/Lock-On Dial
2. Boost Button
3. Air-Speed Trigger
4. Battery-Release Button
5. Latch
6. Electric Contacts
7. Ejection Mechanism
8. Air Intake
9. Base
10. Tube-Release Button
11. Blower Tube
12. Tapered Nozzle
13. Spread Nozzle
14. Shoulder Strap
WARNING:
The safe use of this product requires
an understanding of the information on the tool and
in this instruction manual as well as knowledge of the
project you are attempting. Before use of this product,
familiarize yourself with all operating features and
safety rules.
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with
this blower. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove the
battery pack from the tool when assembling parts.
APPLICATION
You may use this product for the purposes listed below:
◾
Clearing hard surfaces such as driveways and
walkways.
◾
Keeping decks and driveways free from leaves and
pine needles.
NOTICE:
The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse.
ASSEMBLING/REMOVING THE BLOWER TUBE
◾
To Assemble (Fig. B & C)
Align the groove and push the tube onto the blower
housing until you hear a “click”.
◾
To Remove (Fig. D)
Press the tube-release button and remove the tube.