56 VOLT TURBO CHARGER — CH7000E
7
LED INDICA-
TOR
BATTERY PACK
LED ON THE CHARGER
POWER
INDICATOR
ON THE
BATTERY
PACK
BATTERY
PACK POWER ACTION
LED 1 LED 2 LED 3
LED 4 LED 5
Defective
Off
Off
Flashing
red or off Off
Off
Off
-
Battery pack or charger
is defective
Cold/Hot
battery
Off
Off
Shining
red
Off
Off
Off
-
Charging will begin when
battery pack returns to
3°C–57°C
Charging
Flash-
ing
green
Off
Off
Off
Off
Flashing
red, orange
and green
alternately
or last LED
flashing
green, the
others shin-
ing solid
green
Less than
15%
Charging
Shining green
alternately
Off
Off
Off
15% to 35%
Charging
Shining green alternately Off
Off
35% to 55%
Charging
Shining green alternately
Off
55% to 75%
Charging
Shining green alternately
75% to 90%
Charging
Fully Charged Shining green continuously
Off
90% to 100% Charging is complete.
Maintenance charging.
CHARGING A HOT OR COLD BATTERY PACK
If the battery pack is out of the normal temperature
range, LED 3 will shine red. When the temperature of
the battery pack returns to 3°C to 57°C, the charger will
automatically begin charging and the corresponding LEDs
on the charger will shine normally.
DEFECTIVE BATTERY PACK OR CHARGER
If the charger detects a problem, LED Indicator 3 will flash
red or all the LEDs will turn off.
1. Remove and reinsert the battery pack in the charger.
If the LEDs still read “defective”, try charging a
different battery pack.
2. If a different battery pack charges normally, dispose
of the defective battery pack (refer to the instructions
in the battery pack manual).
3. If a different battery pack also indicates “defective”,
unplug the charger and wait until the flashing LED
3 goes out, then reconnect the charger plug to the
power supply. If no charger LEDs shine green briefly
simultaneously for self-inspection at the plugging
moment or LED 3 on charger still display defective,
the charger may be defective.
WALL MOUNTING HOLES
The charger has mounting holes for convenient storage
(Fig. A). Install screws in the wall 76mm apart. Use screws
sufficiently strong to hold the combined weight of the
charger and battery pack.
MAINTENANCE
WARNING:
To avoid serious personal injury, be sure
to remove the battery pack from the tool before cleaning
or maintenance.
WARNING:
When servicing, use only identical EGO
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified
service technician at an EGO Service Center.
WARNING:
It is not recommended to use
compressed dry air to clean the charger. If this is the only
way for cleaning, be sure to wear safety goggles or safety
glasses with side shields. If it is a dusty process, wear a
dust mask.
WARNING:
If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
