3.2.4 THP Models: Pressure Alerts
i
Information
Please be sure to use a decimal point to separate the
decimal digits when entering all the following values.
Open the page
Sensors / Pressure
in the configuration
area to configure humidity alerts.
1.
Please enter the number of seconds after which an
alert is triggered in the input field
Alert delay
, if you
wish to allow for short-term transgressions.
2.
Enter the
Lower limit
that will trigger an alert if
values drop below it.
3.
Enter the
Upper limit
that will trigger an alert if
values rise above it.
4.
Enter a reasonable value for the
Dead-band
, for
instance 2.
5.
Click
Save
to apply your changes.
35
Alerts for limit
transgressions