EGig eG32T, User Manual, Page: 9 / 16

IV. LED Definitions
Power LED
On : The unit is powered on and ready for use.
Off : The unit is powered off.
FDX
On : The port is operating at Full-duplex.
Off
Flashing : Collisions occurred and the port is
operating at Half-duplex mode.
10/100M LED
On : The port is on the 100Mbps status.
Off : The port is on the 10Mbps status.
LINK/ACT LED
On : The port is ready for 10/100Mbps
connection
Flashing : The data is transmitted or received on
the port.
Rear Panel Layout
AC input
AC input (90~260V/AC, 50~60Hz) UL Safety..
-6-
: The port is operating at Half-duplex
without any data being transmitted or
received.
OFF 50~60Hz
ON 90~260VAC