Professional Escenic
06816
06817
PIN
+
4/45/0/GND
9
8
7
6
5
10
3
2
4
1
Amplified speaker output for
Hi-Mid satellites speakers. 50 W.
PIN+
input priority and
– Ground
from EGi modules.
Guarantee
EGi guarantees its electronic and electroacoustic products against any manufacturing defect that affects its operation for 36 months from the production date (indicated in every manufacture),
taking the commitment of repairing or replacing the faulty modules which failure, always to the discretion of EGi, is caused by a manufacturing defect, without any charge for spare parts.
This guarantee does not include charges for the shipping and handling of the modules, nor the labour charges for the replacement in the installation of the aforementioned electronic and
electroacoustic modules. The guarantee will not cover in any case the damages or breakings of the trimming pieces (lattices, trims, masks, frames...).
This guarantee refers only to the concept of replacement in factory of the modules produced by EGi, excluding any other cover or responsibility on the rest of the materials or the whole
of the installation that is put at the user disposal, but that is not supplied nor executed by EGi.
Therefore this guarantee does not cover:
a.
The fitting up and the interconnection between the modules.
b.
The results from the abuse or misuse of the product, including but not limited to:
b.1.
Not using the product for usual purposes, or not following the instructions from EGi for the correct use and maintenance of the product.
b.2.
The installation or use of the products in a way that is not concordant with the technical or security rules now in force.
c.
The malfunctions caused by the wrong installation of the modules, or by an installation with inappropiate cables.
d.
The malfunctions caused by the intervention of a person non-authorised by EGi.
e.
The consequences of mixing with equipment from other sources, and also adaptations, modifications, adjustments and/or adjustment attempts, irrespectively of those that have been
performed in a technically correct way, provided that there is not an express authorisation by EGi.
f.
The consequences of accidents, natural catastrophes or any cause beyond EGi control, including but not limited to lightning, water and public disturbances.
In all these cases that are excluded from the guarantee, and every time that the modules are not considered as faulty by EGi, the sender should take responsibility of the full amount of the repair, and in
the event of a visit from our technicians, the requesting person will bear the expenses originated without a cause justified in the guarantee.
Findings / Troubleshooting
Example of installation
1
Loudspeaker protection grille..
2
LED status indicator.
3
Auto selector On (stand-by) / On fixed.
4
Power selector (115/230 V~).
5
Selector of the subwoofer phase (0º/180º).
6
High-Mid Gain volume (satellite speakers).
7
Low Gain volume (subwoofer speaker).
8
Crossover DSP cutting frequency.
9
Bass Reflex output.
10
Holding handle.
ATTENTION:
If you notice any problem in your EGi installation, our Customer Support Service will attend you from 9 h. to 15 h. (Central European Time).
Av. Almozara, 79 • 50003 ZARAGOZA - Spain •
T.
+34 976 40 53 56 •
F.
+34 976 40 53 54 • [email protected] • www.egiaudio.com
06816 - 06817
10” Active subwoofer with bluetooth and DSP,
100 W biamplified
en
instruction manual
115/230 V~
Mains supply
Line IN input + Left channel
Line IN input – Ground GND
Line IN input + Right channel
Line Input (Auto On)
for PC, smartphones,
tablets, mixers...
06816
- From 1 speaker at
4
minimun
, up to 8 speakers of 32
.
06817
- From 1 speaker at
50 W maximum
, up to 33 speakers at
1.5 W maximum
(100 V).
*
Check the availability of accessories for the subwoofer type.
• Hanging kit 06038.
• Protective rear adjustment grille (by special order).
• 06074 Wall mounting kit for vibration absorption in subwoofers and baffles.
The active subwoofers 06816 and 06817 have separate amplification for both, the subwoofer (LOW) and for the medium-high (Hi-Mid) satellite output. Its
amplification is 50 W for the subwoofer and 50 W at 4 Ohms (ref 06816) or 50 W at 100 V (ref 06817) for the Hi-Mid satellites.
It has volume or gain adjustment for both independent outputs: one volume for Hi-Mid Gain and another volume for Low Gain.
Active preamplification with DSP for cutting "Crossover" frequencies using a potentiometer to select the cutoff frequency that is sent to the subwoofer and sent
to the satellites. In the selector, the selected frequency on the left will sound on the subwoofer and the selected frequency on the right will sound on the satellites.
Active DSP with CLIP limitation to avoid saturations.
In this way, high quality and optimal sound control is achieved.
It has 3 types of inputs with a priority each one:
1
st
PRIORITY (yellow LED):
PIN Input with mono activation included for EGi products only (eg: controls, COMPACT consoles and amplifiers with music or
warnings).
2
nd
PRIORITY (green LED):
Stereo line input for 500 mV LINE OUT audio signals (ex: preamps, mixers, PCs, tablets, mobile phones, mp3 players ...).
3
rd
PRIORITY (blue LED):
Stereo Bluetooth input with password access (Factory Friendly Name:
EGi 06816 XXXX
).
These subwoofers can work independently only as active subwoofers or better as complete amplifiers with output to both subwoofers and satellites. At the same
time, they allow working in parallel using the inputs (line or PIN) up to 40 units of subwoofers.
Information
ABOUT THIS MANUAL
We have taken all efforts to make the contents of this manual reliable and updated.
However, EGi does not guarantee the accuracy of the contents which are subject to change
without previous notice.
TECHNICAL SUPPORT
If, while using the system, you encounter a problem that cannot be solved by consulting the
manual, please contact the installer. You can also consult the website
www.egiaudio.com
to find the latest information and other resources to solve your problem.
COPYRIGHT INFORMATION
This manual in whole or in part, and any product or software described herein, may not be
reproduced, transmitted, saved in data recovery systems, or translated into any language
in any form or by any means, except all documents saved by the user to make security
copies; without the previous written consent of the manufacturer.
All products or corporate names herein may (or not) be registered trademarks or copyright
of their respective companies and are used for identification or explanatory reasons only,
and in interest of the owner without the intention of infringing any regulation or rule.
SAFETY INSTRUCTIONS
This system has been designed and manufactured in compliance with the latest safety
standards for household electronic equipment. However, to ensure safe use of this product,
it is important to follow the instructions given in this documentation.
• No
EGi
product should be covered with anything that impedes ventilation.
• Do not place any sources of naked flame such as lighted candles or similar elements
on top of the device.
• Do not expose the device to poured, splashed or sprayed water.
• Disconnect the Mains supply before carrying out any work on the installation.
• Do not expose the equipment to direct sunlight.
• Do not use excessive force when handling the controls.
• The user should abstain from carrying out any alterations or repairs on the product,
reserving these actions for qualified personnel.
• Only use accessories supplied by
EGi
.
• EGi will not be held liable for any damage arising from misuse of the product or usage
other than what is was designed for (See Guarantee section).
An exclamation mark inside a triangle indicates important operation and
maintenance instructions and the existence of components that may
affect safety if replaced.
Class II device.
IMPORTANT
Please read these
"Safety instructions"
carefully before using any
EGi
product.
The lightening-shaped arrow warns of the presence of dangerous voltage. To
minimise the risk of electric shock, do not remove the cover.
The lightening signs near the amplifier output terminals warn of the danger
of electric shock in normal usage conditions (Terminals dangerous to touch).
Do not touch these terminals while the device is in operation.
This symbol indicates that the product must not be treated as normal
domestic waste, but must be handed over to the corresponding collection
point for electrical and electronic equipment.
The CE smark means European Conformity and is a European mark for
certain groups of services or industrial products.
The CE mark must be displayed by a product if it is within the scope of the
approximately 20 "New Approach" Directives and can be sold and put into
service legally within the countries of the EU. If the product complies with the
provisions of applicable European Directives and the CE is displayed on the
product, member states cannot prohibit, restrict or impede the placement of
the product or service on the market. Thus, the CE mark can be considered
as a passport for commercialising a product in EU countries.
LIABILITY
Due to the wide variety of services and devices the system interacts with, the manufacturer
cannot be held liable for failure or faulty operation of devices not manufactured by
EGi
and
connected or used by any module in the series.
DECLARATION OF CONFORMITY
Electroacústica General Ibérica, S. A. with registered address in Avda. Almozara, 79 - 50003
Zaragoza (Spain), declares under its sole responsibility that the equipment described in
this manual incorporates the functions specifies in each case and complies with current
regulations:
Directive 2004 / 108 EC, regarding electromagnetic compatibility and Low Voltage Directive
2006 / 95 / EC, regarding safety in low voltage receivers.
Due to a policy of continuous improvement,
EGi
reserve the right to modify their
products at any time. Although every effort is made to present up to date documentation,
the documents and illustrations provided may not coincide with the product purchased.
You can access the latest versions of documentation in:
www.egiaudio.com
EGi
will not be held liable for any possible errors in the text or references.
All brands mentioned herein are registered with their owners.
For use in Mexico, the operation of this equipment is subject to the following two
conditions:
1.
It is possible that this equipment or device does not cause harmful interference and
2.
this equipment or device must accept any interference, including interference
that may cause undesired operation.
HOW TO USE:
The active subwoofers 06816 and 06817, when connected to the main power, it switches to stand-by mode with Bluetooth switched off but visible and paired.
• BLUETOOTH (blue LED):
When the subwoofer is turned on, the bluetooth remains visible and paired with Friendly name "
EGi 06816 XXXX
", the blue
LED flashes slowly. To link, you have to select it from the available Bluetooth list and enter the password that comes on the adhesive back label of the subwoofer.
Once linked, the blue led will change to fixed and you will be able to select songs and music.
The LINE OUT and PIN input lines are always in "stand-by" detection mode waiting for:
• LINE IN (green LED):
Input with automatic audio activation. When a line audio signal is detected, the subwoofer turns on and starts playing that line. When
the audio line disappears and there is more than 60 seconds. of silence, the subwoofer goes to stand-by mode.
• PIN IN (yellow LED):
This line is only activated when a carrier DC voltage is detected on the audio line
only of the EGi products
. It is the line of highest
priority and is usually used for calls or music with preference.
•
SWITCHING-ON:
In the "AUTO" (stand-by) position, the unit waits to detect any of the 3 inputs. In the ON position, the subwoofer switches on and plays
the LINE IN input. In this mode the subwoofer will always be active, playing the LINE IN signal (green LED), you will not be able to listen to bluetooth and
there will only be priority over this the PIN IN input.
•
SELECTOR CHANGE OF PHASE:
This selector determines the phase of movement of the loudspeaker, at 0º the phase is positive outwards and at 180º the
phase is negative inward. It is used when there are other subwoofers in the same room or when the satellites are capable of reproducing frequencies lower
than 100 Hz. It is recommended to work at 0º except that in the room there is a perception of low frequency cancellations.
• FILTER
CROSSOVER:
Setting the cutoff frequency, the frequencies selected to the left of the selection will be played by the subwoofer. The frequencies
selected to the right of the selection will be reproduced by the satellites.
• LOW
GAIN:
Attenuation or enhancement of the subwoofer output.
• HIGH
GAIN:
Attenuation or enhancement of the satellite output.
Active filter crossover
Input audio signals
Cabinet material
Main power selection
Power consumption
Weight (Kg)
Dimensions (mm)
50 - 200 Hz Subwoofer /
50 - 20000 Hz Hi-Mid
BT (Bluetooth A2DP)
Line IN (500 mV)
PIN (3 V audio/7 Vdc)
Microgranulated black wood
115 or 230 V~; 50/60 Hz
2 A (115 V~) / 1 A (230 V~)
13.5
300 x 300 x 500
Technical specifications
Total power active subwoofer
Subwoofer speaker max. power
(RMS)
Type
Hi-Mid gain power
(RMS)
Woofer
Frequency response (@ –6dB)
Sensitivity average (1 m dB
SPL
)
Cabinet type
100 W (RMS); 200 W peak
50 W (RMS); 100 W peak
10" bass reflex subwoofer
06816:
50 W (min. 4
)
06817:
50 W; 100 V
10"
27 ÷ 370 Hz
90 dB (max peak 110 dBSPL)
Bass Reflex
Wiring diagram
Function
Problem
• The subwoofer does not turn on or no led lights up.
• The subwoofer is turned on, but nothing is heard.
• The blue Bluetooth LED flashes slowly, but it is not linked to my device.
Possible solution
• Check if the subwoofer is connected to the mains.
• Check the GAIN volume levels by raising them as much as necessary.
Also check the volumes of the sound sources or review the connections
of the installation.
• Make sure you have successfully linked a Bluetooth device taking into
account the password indicated on the back sticker.
DIRECT PLACEMENT
ON CEILING
PLACEMENT WITH SIRGA
ON CEILING
INSTALLATION IN WALL
•
Subwoofers are low frequency systems with long wavelengths. They are omnidirectional sounds that allow their location in multiple points of the room. Its
placement can be direct with screws and plugs (ref 06074) or hung from the ceiling with metal wires (Kit 06038).
For optimal efficiency, it is recommended to place them subwoofers in corners, mainly or at 1 m. max. of floors, walls or ceilings.
•
Make a correct adjustment of the cutoff frequency, bass gain level and treble-midrange gain level depending on the speakers used. Use the cutoff frequency
of the subwoofer as the minimum frequency of the satellite speakers.
• It is vital that for satellite speakers to be in phase with the subwoofer, connect the polarity "+" and "–" of the satellites correctly in parallel.
06038 Kit
009122 • 05/2018
