HIGH QUALITY SOUND
008816 01/2018
4 1 5 1 9
41519
Friendly Name
PIN
Friendly Name
Technical specifications
41519
Bluetooth
®
basic module HiFi of 6+6 W, special hidden for ceiling format
e n
i n s t r u c t i o n m a n u a l
Av. Almozara, 79 50003 ZARAGOZA - Spain
T.
+34 976 40 53 56
F.
+34 976 40 53 54
e-mail:
[email protected] www.egiaudio.com
Wiring diagram
Power supply
115/230 V~; 50/60 Hz
Consumption max
200 mA (115 V~) / 100 mA (230 V~)
Consumption stand-by
0.3 W
Bluetooth
®
profile
V. 2.0; Clase II; A2DP SINK & AVRCP (1.3)
Max. power output
6+6 W
RMS
; (12+12 W
PEAK
) max; 4
W
min.
Sound
Stereo/Mono
Mechanical format
Electrical ballast
Size cutting
ø65 mm.
Weight (Kg.)
0.16
Dimensions (mm)
170 x 48 x 50
Troubleshooting
Problem
Module doesnt work at all.
The module can be linked to a Bluetooth
®
device, but there is no sound.
Possible solution
Check that the sound unit is powered. A voltage between 115 and 230 V~
50/60Hz must be applied to
L
and
N
terminals.
Check that the speakers are properly connected to
L+
/
L
y
R+
/
R
outputs.
Verify the absence of short-circuits and check that the speakers line impedance
is above 4
W
. Make sure that a Bluetooth
®
device is connected, and set
volume level to maximum.
Basic example with Bluetooth
®
SINGLE HALL OR ROOM WITH BLUETOOTH
®
AUDIO, SOUND IN FALSE CEILING
Min. 4
W
per channel
6+6 W
41519
Operation Bluetooth
®
module amplifier
First connection
The 41519 amplifier Bluetooth
®
when is powered for the first time or after a blackout,
it initializes on "stand-by" mode, this way the module is visible to any Bluetooth
®
device and can be paired with it.
The module "Friendly Name" is "
EGi 41519 xxxx
". This name will appear on the
Bluetooth
®
device screen when searching.
EGi
is the brand,
41519
is the product
reference and "
xxxx
" stands for the last four digits of the serial number.
Every module has a unique Friendly Name, so the user can know which module is
connecting to. Friendly Name is printed on two labels: one is attached to the enclosure,
and the other one is left loose into the packaging.
Pin code linking
A 4-digit random
password / PIN
code is indicated on the labels. It must be keyed
in during linking process.
Once linked and connected, the module will start to sound.
WARNING:
Please dont lose and keep the labels, so that the
Friendly Name
and
the
PIN
code are always available.
Turning ON
The module remains in standby state until it is connected to a Bluetooth
®
device.
When connected, it goes to
ON
state: audio output is activated and the volume is
adjusted at maximum level .
From this moment, volume control and music selection will be controlled from the
linked Bluetooth
®
device.
NOTE: Disconnection causes can be two: a manual command from the device, or a
lost of coverage because distance.
When the module is disconnected, it goes to standby state: audio output is disabled
and the module is visible/connectable again. In other words, it can be linked to a new
Bluetooth
®
device or connected to a known device (one that has been linked previously).
Note
The sound unit must be connected to a mains voltage between 115 and 230 V~ 50/60Hz, prior to being used.
Because these devices communicate by radio frequency, depending on the environment interference and objects, communication can be altered.
It has a LED status indicator inside the module, to visualize it through the ventilation slots.
As there are no LED indicators on the outside, the user can verify their correct operation through a speaker connected to one of the two stereo outputs Left and Right speakers.
User bluetooth
®
device
(smartphones, tablets and PC laptops).
L+
L
R+
R
230 V~ / 115 V~
±15%; 50-60 Hz
N
L
Distance from bluetooth
®
device
from
1
to
30 m
depending on the environment.
EGi
guarantees its electronic and electroacoustic products against any manufacturing defect that affects its operation for
36 months from the production date
(indicated
in every manufacture), taking the commitment of repairing or replacing the faulty modules which failure, always to the discretion of
EGi
, is caused by a manufacturing defect,
without any charge for spare parts.
This guarantee does not include charges for the shipping and handling of the modules, nor the labour charges for the replacement in the installation of the aforementioned
electronic and electroacoustic modules. The guarantee will not cover in any case the damages or breakings of the trimming pieces (lattices, trims, masks, frames...).
This guarantee refers
only
to the concept of
replacement in factory of the modules
produced by
EGi
, excluding any other cover or responsibility on the rest of the
materials or the whole of the installation that is put at the user disposal, but that is not supplied nor executed by
EGi
.
Therefore this guarantee does not cover:
a.
The fitting up and the interconnection between the modules.
b.
The results from the abuse or misuse of the product, including but not limited to:
b.1.
Not using the product for usual purposes, or not following the instructions from
EGi
for the correct use and maintenance of the product.
b.2.
The installation or use of the products in a way that is not concordant with the technical or security rules now in force.
c.
The malfunctions caused by the wrong installation of the modules, or by an installation with inappropiate cables.
d.
The malfunctions caused by the intervention of a person non-authorised by
EGi
.
e.
The consequences of mixing with equipment from other sources, and also adaptations, modifications, adjustments and/or adjustment attempts, irrespectively of those
that have been performed in a technically correct way, provided that there is not an express authorisation by
EGi
.
f.
The consequences of accidents, natural catastrophes or any cause beyond
EGi
control, including but not limited to lightning, water and public disturbances.
In all these cases that are excluded from the guarantee, and every time that the modules are not considered as faulty by
EGi
, the sender should take responsibility of the
full amount of the repair, and in the event of a visit from our technicians, the requesting person will bear the expenses originated without a cause justified in the guarantee.
ATTENTION:
If you notice any problem in your
EGi
installation, our Customer Support Service will attend you from 9h. to 13h (Central European Time).
Guarantee
Information
For use in Mexico, the operation of this equipment is subject to the following two conditions:
1.
It is possible that this equipment or device does not cause harmful interference and
2.
this equipment or device must accept any interference, including interference that may cause undesired operation.
Speaker configuration from:
1 speaker of 4
W
, 2 of 8
W
, 4 of 16
W
to
8 speakers of 32
W
per channel.
Selection of sound mode and maximum volume attenuation
The module 41519 is by default in stereo mode without any attenuation 0 dB. However with the pins that
are delivered in the little bag, you can select the MONO sound mode, to use a single speaker in a channel
with all the sound content, or to use the two channels sounding the same for both channels.
At the same time, by default the equipment comes without attenuation of volume at 0 dB, but through
the pins delivered in the little bag, the maximum volume can be attenuated by placing the PIN in the
-4 dB, -10 dB or -16 dB positions; depending on the maximum volume desired.
As a note, we indicate that each -3 dB less that is attenuated from 0 dB, is equal to half from the
initial power.
GND cable connection to extend power
to another power amplifier.