EGi AV Device DIN Adapter, User Instructions

Page: 2 / 2

User Instructions for the AV Device DIN Adapter
8400392-51
PC PARALLEL PORT INPUT
AVD DIN1
AVD DIN2
AVD DIN3
PC DIN1
AV Device DIN Adaptor
AV
D
EV
IC
E I
N
P
U
T
AMP
DINS
OUTPUT
AV Device DIN Adapter
AV Device Tester Net Amps 200
Isolated
Outputs
2 V
400 µV
Photocell Audio Chart
Power DIN1
DINs
Output
DIN2 DIN3
9 VDC
+ -
Inputs
AV Tester
Electrical Geodesics, Inc.
+1.541.687.7962 USA
DB-9 M-M cable
(provided with the AV Device Tester)
DB-9 M-M cable
(provided with the AV Device DIN Adapter)
connects to the NA300 ---
or
--- the NA200
DB-25 M-M cable
(provided with the AV Device DIN Adapter)
Hypergrip
cable
(EGI 6503376)
ARRAY DATA TIMING
Net Amps 300
Digital Analog
E-Prime PC
Adapter Tester
Testing____ Setting Setting _
CRT monitor AVD DIN1 Photocell
Audio AVD DIN2 Audio
LCD monitor AVD DIN3 Photocell
____________________________________
*Refer to the AV Device Tester manual for
complete usage and safety instructions.
Attach to AV Device Tester* if testing:
Adapter Tester
Use________ Setting Setting __ __
Experimental PC DIN1 N/A
control system
_______________________________________
*You also need to change the Source tab panel
selection to
EGI Response Pad
, because the
adapter inverts the parallel port signal.
Attach to PC for normal operation*:
*Refer to the Net Amps
manual for complete
usage and safety
instructions.
Attach to your
Net Amps*
(300 or 200).
Figure 1. Cable connections and settings when using the AV Device DIN Adapter for testing or normal operation
For questions or additional assistance, please contact us at:
Electrical Geodesics, Inc. (EGI)
500 E 4th Avenue, Suite 200
Eugene, OR 97401 USA
+1.541.687.7962 ! supportteam@egi.com ! www.egi.com