11
1
2
3
4
2.5 Tilt the mower up during maintenance
and service procedures
The mower is supplied with a support frame for use during
service and maintenance of the mower.
The frame is attached to the mower guard on delivery.
(Picture 1)
To tip the mower up, set the cutting height at 3–4 on the
scale. (See Section 2.4)
Removing the frame
1. Pull the locking handle out and hold it in its “out”
position. (Picture 2)
2. Pull out the frame.
Fitting the frame
1. Use the A-frame of the base machine to lift the mower.
2. Fit the frame to the mower guard, using the two
attachment holes in the guard. (Picture 3)
3. Pull the locking handle out, and make sure that it locks
in the hole.
4. Lower the mower again and drive the base machine
away.
Tilt the mower up:
1. Turn the lever so that the lock on the frame is lifted out.
(Picture 4)
2. Lift the back edge of the mower and stand it up.
Make sure that the lock falls into place when the mower is
laid down.
The frame can be carried on top of the mower, if it is
placed upside down on the mower guard.
Locking handle
Frame on top of mower
Operator’s manual
Fit the frame
Lock Lever
Operator’s Manual City Ranger 2250 Mulch mower/rotary mower 1600
