Egholm 2100, Operator'S Manual, Page: 25 / 36

Bleeding the fuel system
Bleeding the fuel system is necessary if any of the
following have occurred:
A) Replacing fuel filter.
B) After repairing or replacing any fuel hose.
C) Running out of fuel.
Bleeding the fuel system/the injection
pump:
A) Loosen the air bleed screw on the fuel pump and
turn the ignition key into starting position until all the
air bubbles are out.
B) When no more bubbles appear, re-tighten the air
bleed screw.
C) Loosen one of the nozzle pipes and turn the
ignition key into starting position until all the air
bubbles are out.
D) When no more bubbles appear, re-tighten the
nozzle pipe and start the engine.
Warning!
N Ne evve err b blle ee ed d tth he e ffu ue ell s syys stte em m w wh he en n tth he e
e en ng giin ne e iis s s sttiillll h ho ott.. S Sp piilllliin ng g ffu ue ell o on n a a h ho ott
e exxh ha au us stt m ma an niiffo olld d c ca an n c ca au us se e ffiirre e..
Warning!
A Allw wa ayys s s stto op p tth he e e en ng giin ne e b be effo orre e
c ch he ec ck kiin ng g o orr rre ep plla ac ciin ng g ffu ue ell h ho os se es s..
D Da am ma ag ge ed d ffu ue ell h ho os se es s c ca an n c ca au us se e ffiirre e..
Check the fuel hoses every 50 hours of
operation:
A) Check for loose clamps - lubricate the screw with a
little oil and retighten.
B) Replace any fuel hose or clamp found to be worn
or defective.
C) Bleed the fuel system after replacing fuel hoses.
Fuel filter
Airbleed screw on the fuel pump
Nozzle pipe
25
3. SERVICE AND MAINTENANCE