NOTE: technical specifications indicated here may be subject to change without
notice, in order to improve product performance.
Instructions
1. Connect the cable to the power adapter and plug the power adapter into the
power outlet.
2. Place your Qi enabled smartphone on the Wireless Charging Pad surface to
charge your phone.
3. Touch the metal plate to turn on and off the LED light
(only available for SP10R -
CPSL10R)
Smartphone positioning
The Wireless Phone Charger features an advanced electronic optimization to
make smartphone positioning easier. Adjust the smartphone’s position to ensure
proper alignment with the charging coil in the center of the pad. Direct contact is
required for wireless charging.
Troubleshooting
If the product is not working properly, please check the troubleshooting. If your
situation differs from normal conditions, please try to solve the issue or call
customer service.
For full troubleshooting visit our website at:
www.eggtronic.com/support/troubleshooting
Does the power outlet work? (normal conditions: yes)
Are you using the provided power adapter? (normal conditions: yes)
Try charging your smartphone directly with the power adapter using your cable.
Does it work? (normal conditions: yes)
Is the cable correctly attached to the adapter? (normal conditions: yes)
Has the Wireless Charging Pad suffered a fall, impact or compression? (normal
conditions: no)
Is your smartphone officially compatible with Qi Wireless Charging or equipped
with a working Qi Receiver? (normal conditions: yes)
