EGG RK 1893 Digitouch, Instruction Manual

Page: 7 / 92

7
INSTRUCTIONS FOR USE
Before using the kettle for the first time, remove the kettle and wash the inside with normal
dishwashing detergent. After this rinse it with lukewarm water. Before using the kettle for the first
time, fill the kettle with clean, cold drinking water to the maximum level, turn it on and bring the
water to the boil. Then pour the water out and repeat the process at least five times. This
procedure will properly boil the kettle and get rid of any potential aftertaste. If you feel there is an
aftertaste from the boiled water, we recommend repeating the process. Another recommendation
is to leave the empty kettle open for 24 hours. The material of the kettle in contact with water is
certified that it presents no risk to health and safety. Any slight "smell" or "aftertaste" during initial
use after unpacking the kettle is normal and should not be grounds for a complaint.
Basic operation
1. Place the base on a dry, smooth and flat surface and insert the plug into the socket. After
placing the kettle onto the base, the power is automatically switched on.
2. Fill the kettle with water to at least the "MIN" mark (0.5l)
3. Lightly press the power button (7), a beep sounds and the button next to the boil indicator (4)
lights up, this means that the water is starting to boil.
4. You can see the current water temperature in the kettle on the display (3)
5. When the water reaches boiling point, the indicator light will go out and a beep will sound.
Note: if you wish to stop the kettle boiling, press the button (7) again. A double beep sounds and
the boil indicator light (4) goes out.
Setting and maintaining the temperature of the boil without boiling the water to 100°C:
If you wish the boiling water to be interrupted when the desired temperature is reached, place the
kettle on the base (8) and select the desired temperature (40 °C/55 °C/80 °C/90 °C) by pressing the
temperature control button (6) repeatedly; this temperature is shown on the display (3). As soon
as the "beep" sounds, the kettle starts boiling. When the kettle has finished boiling to the desired
temperature, it beeps briefly 3 times, then the kettle starts the temperature hold function for a
duration of 24 hours. The temperature hold function is active when the LED next to the
temperature hold indicator (5) is lit The kettle will start boiling water again if the selected
temperature drops by 10°C.
Notes: You can cancel the temperature hold by briefly pressing the off button (7)
Setting and maintaining the temperature of the boil with boiling water to 100 °C :
If you wish the water to boil to 100°C first and then maintain the temperature you have selected,
place the kettle on the base (8) and select the desired temperature (40°C/55°C/80°C/90°C) by
pressing the temperature control button (6) repeatedly, this temperature is shown on the display
(3). Then press the power button (7), a beep sounds and the kettle starts to boil. The LEDs next to
the Boil Indicator (4) and the temperature hold Indicator (5) will light up. Once the boiling of the
water is complete, the temperature of the water in the kettle will drop to the temperature you
have selected, after which the kettle will start the temperature hold function for a duration of 24
hours. The temperature hold function is active when the LED next to the temperature hold
indicator (5) is lit The kettle will start boiling water again if the selected temperature drops by
10°C.
En
gli
sh